Skip to content
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

Cobalt CB12 Floorline Bed, King Single (250 kg)

Code CB12KS

A king single floorline care bed with a 150 to 680 mm platform height, backrest, knee break, Trendelenburg and one-button chair position. Safe working load 250 kg, built-in 195 mm bed extension, under-bed light. Suits a client at risk of falls who needs a full profiling bed at home or in care.

How to get it

BuyRequest a quoteQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.
HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.
NDIS · Aged care · DVA · Private

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

The Cobalt CB12 Floorline Bed is a four-function electric care bed that lowers to 150 mm from the floor to reduce the height of a fall, and rises to 680 mm for carer tasks. The king single takes a 1050 x 1980 mm mattress, is 1090 mm wide and 2110 mm long, and extends by 195 mm at the foot end to 2305 mm for a taller client. Safe working load is 250 kg.

The backrest raises to 65 degrees with auto-regression to reduce sacral shear, the knee break raises to 35 degrees, Trendelenburg and reverse tilt run to 14 degrees, and a single button sets the chair position. It has a manual calf lift, under-bed lighting and four Tente castors. The king single bed weighs 138 kg.

Key features

  • Platform height 150 to 680 mm
  • Safe working load 250 kg
  • King single mattress platform 1050 x 1980 mm, extends 195 mm at the foot end
  • Backrest 0 to 65 degrees with auto-regression, knee break 0 to 35 degrees
  • Trendelenburg and reverse Trendelenburg 0 to 14 degrees
  • One-button chair position and manual calf lift
  • Under-bed lighting and four Tente castors
  • Complies with IEC 60601-2-52, ARTG listed

Who it suits

A client with a history of falls from bed, night-time confusion or dementia where bed rails are not appropriate, and a client who needs frequent repositioning in bed or a supported sitting position for meals and breathing. The 250 kg rating and 1050 mm width give room for a larger client or for turning with slide sheets. For a client who transfers independently and does not need the floorline height, a standard home care bed is cheaper and lighter to move; for a client over 250 kg, ask about a bariatric bed.

Good to know

  • Bed only: mattress, bed ends, rails, self-help pole and crash mat are quoted separately
  • Delivered and assembled by our team; allow for a 2110 mm footprint plus room for the foot-end extension
  • Warranty is 10 years on the frame and 3 years on electrics
  • Also available in single (880 x 1980 mm mattress)
  • Funding may be available through NDIS, Home Care Packages and Support at Home, or DVA

Book a trial at our Northern Tasmania or Southern Tasmania showroom, or ask us for a quote. Thrive Lifecare is Tasmanian owned and delivers Tasmania-wide.

Specifications

Overall width1090 mm
Overall length2110 to 2305 mm
Overall height150 to 680 mm
Weight capacity250
Weight138 kg
Warranty10 years frame, 3 years electrics
Bed sizeKing Single, 1050 x 1980 mm mattress
Castor sizeFour Tente castors
Height range150 to 680 mm platform height
Other specificationBackrest 0 to 65 degrees, knee break 0 to 35 degrees, Trendelenburg 0 to 14 degrees, 195 mm foot-end extension
Power sourceMains electric
Applicable standardIEC 60601-2-52

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link