Skip to content
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

Etac My-Loo Fixed Toilet Seat Raiser with Arm Supports

Code 80301512

A bolt-on raised toilet seat with fold-up arm supports from Etac, in 20, 60 and 100 mm heights. Seat width 360 mm, 480 mm between the arms, arms adjustable to three heights, safe working load 150 kg. It replaces the toilet seat and lid.

How to get it

BuyRequest a quoteQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.
HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.
NDIS · Aged care · DVA · Private

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

The Etac My-Loo Fixed is a raised toilet seat that bolts to the toilet pan in place of the existing seat, with a pair of arm supports for pushing up and lowering down. It comes in 20, 60 and 100 mm heights so the raise can be matched to the client’s leg length and the pan height. The seat is 360 mm wide and 400 mm deep with a 230 x 360 mm opening, the arms are 480 mm apart and adjust to 135, 165 or 205 mm above the seat, and the safe working load is 150 kg.

The arms fold up out of the way and either can be removed, so the seat can be used with one arm on a wall side. Quick-nuts fix it from above without reaching under the pan. The seat is polypropylene with a soft TPE surface, the arms polypropylene on stainless steel, and it is wipe clean. Manufacturer warranty is 5 years.

Key features

  • 20, 60 or 100 mm raise
  • Seat 360 x 400 mm with a 230 x 360 mm opening and rear recess for cleaning
  • Arm supports 480 mm apart, adjustable to 135, 165 or 205 mm above the seat
  • Arms fold up and are removable, one or both
  • Safe working load 150 kg, 200 kg with the optional support legs
  • Fixed from above with quick-nuts
  • 5 year warranty

Who it suits

A client who needs a modest, stable raise and something to push up on, for example after hip or knee replacement, with arthritis in the knees, or with reduced balance, and who has a toilet of their own where a fixed fitting is acceptable. The 20 mm suits a client who mostly needs the arms; 100 mm suits a tall client or a low pan. For a rental property or a client who cannot fit a bolt-on seat, an over-toilet frame gives similar support without tools, and a client above 150 kg needs the support legs added.

Good to know

  • Replaces the existing toilet seat; check the pan bolt spacing before ordering
  • A lid and a soft seat cushion are optional extras
  • Support legs (sold separately) raise the safe working load to 200 kg
  • Compliant with AS/NZS 3973:2009 and ARTG listed according to the distributor

Book a trial at our Northern Tasmania or Southern Tasmania showroom, or ask us for a quote. Thrive Lifecare is Tasmanian owned and delivers Tasmania-wide.

Specifications

Seat width360 mm
Seat depth400 mm
Weight capacity150
Warranty5 years
Height100mm
20mm
60mm
Arm height135 to 205 mm
MaterialPolypropylene and TPE seat, polypropylene and stainless steel arms
Mounting or fixingBolts to the toilet pan with quick-nuts from above
Other specificationSeat opening 230 x 360 mm; 200 kg with optional support legs
Width between arms480
Applicable standardAS/NZS 3973:2009

Compare sizes

Pick a column to select that option.

20mm80301510Select
60mm80301511Select
100mm80301512Select
Height2060100

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link