Skip to content
Delivered and assembled Tasmania-wide
Serviced by our own technicians
Quotes available for NDIS, aged care, DVA and private
Tasmanian owned and operated

Raz-AT Attendant Tilt Mobile Shower Commode

Code Z30016

A stainless steel tilt-in-space shower commode with 40 degrees of tilt, a moulded contoured seat and tool-free height adjustment, rated to 160 kg. Base frames from 16 to 24 inches wide; the 18 inch and wider frames fit over most toilets.

How to get it

BuyRequest a quoteQuotes in the format your funding needs: NDIS, aged care, DVA or private. Delivery and assembly are included.
HireEnquire about hireDelivered and set up. Ask us about weekly rates and minimum periods.
TrialBook a trialTry it at home or in our showroom, no obligation.
AskAsk a questionTalk to a consultant. Call us or send a question.
NDIS · Aged care · DVA · Private

For OTs and support coordinators

Assessment support, trials at home or in the showroom, quotes with NDIS item codes and a consultant who will do the home measure.

Delivered and assembled · NDIS, aged care, DVA and private · Serviced by our own technicians

About this product

The Raz-AT is an attendant operated tilt-in-space mobile shower commode. Locking gas springs and a foot pedal tilt the seat up to 40 degrees, so a client who cannot hold themselves upright can be showered and toileted safely, and pressure is shifted off the seat during a long routine. The frame is polished stainless steel on four 125 mm dual-locking castors, and the safe working load is 160 kg. Seat height adjusts over 100 mm, from 540 to 640 mm, in 25 mm steps without tools.

The moulded seat has an ischial and pelvic alignment system with 50 mm of fore and aft adjustment, and comes with a commode pan and lid, a moulded headrest, flip-up padded arms and swing-away footrests with flip-up plates. Base frames are made in 16, 18, 20, 22 and 24 inch (405 to 610 mm) widths; overall width is the seat width plus about 115 mm. The chair weighs about 28 kg with footrests.

Key features

  • Tilt-in-space up to 40 degrees with locking gas springs and a tilt-assist pedal
  • Seat height 540 to 640 mm in 25 mm steps, adjusted without tools
  • Base frame widths 405 mm (16 in) to 610 mm (24 in); 18 inch and wider frames clear most toilets
  • Toilet clearance under the seat 430 to 530 mm
  • Moulded contoured seat with integral-skin foam and pelvic alignment adjustment
  • Flip-up padded armrests, swing-away footrests, moulded headrest, commode pan with lid
  • Stainless steel frame, 125 mm dual-locking castors, safe working load 160 kg

Who it suits

A client with poor sitting balance, high tone, or fatigue who cannot manage an upright shower commode for the length of a shower, including clients with MS, spinal cord injury, cerebral palsy or advanced neurological conditions, and one who is showered and toileted by a carer. Choose the frame width to the client’s hip width and the bathroom, and check the toilet before choosing the 16 inch frame, which will not straddle a standard pan. A client who can propel themselves should look at the Raz self-propel option; a client who needs reclining as well as tilt needs the Raz-CAT or a different chair.

Good to know

  • Seat depth options of 405 mm (16 in) or 485 mm (19 in), and open or bridged front seat; specify at ordering
  • Extended footrests, elevating leg rests, lateral supports and larger headrest pads are available
  • Stainless steel frame carries a lifetime warranty against corrosion; other parts 2 years
  • Custom seat widths up to 50 mm wider than the frame can be ordered

Book a trial at our Northern Tasmania or Southern Tasmania showroom, or ask us for a quote. Thrive Lifecare is Tasmanian owned and delivers Tasmania-wide.

Specifications

Overall width520 to 725 mm
Seat width405 to 610 mm
Seat depth405 or 485
Seat height540 to 640 mm
Weight capacity160
Weight28 kg
WarrantyLifetime against corrosion on stainless frame, 2 years limited
Adjustment rangeTilt 0 to 40 degrees
Brake typeDual-locking castors
Castor size125 mm
Frame or main materialPolished stainless steel
Other specificationToilet clearance under seat 430 to 530 mm
Overall depth990 mm
Seat typeMoulded contoured with integral-skin foam
Size16"W (41cm) base frame [will not fit over standard toilets]
18"W (46cm) base frame [will fit over most toilets]
20"W (51cm) base frame width
22"W (56cm) base frame width
24"W (61cm) base frame width

Compare sizes

Pick a column to select that option.

16"W (41cm) base frame [will not fit over standard toilets]Z30016Select
18"W (46cm) base frame [will fit over most toilets]Z30018Select
20"W (51cm) base frame widthZ30020Select
22"W (56cm) base frame widthZ30022Select
24"W (61cm) base frame widthZ30024Select
Size16"W (41cm) base frame [will not fit over standard toilets]18"W (46cm) base frame [will fit over most toilets]20"W (51cm) base frame width22"W (56cm) base frame width24"W (61cm) base frame width
Overall width520570620675725
Seat width405455510560610

Not sure what your client needs yet?

Call us. A ten-minute conversation is usually the fastest way to a good answer.

Secret Link